22 Aug 2013
Summer is almost here, and what better way to spend time outdoors than relaxing in a swing bed.
The swing bed is made from reclaimed timber pallets, but you can make it out of any reclaimed timber or make one from scratch using PAR pine from your local Builders Warehouse.
To make a swing bed you will need two timber pallets joined together with nuts and bolts.
Make sure the timber is in good condition and the slats are sturdy and not broken.
Drill holes at the end of the pallet for threading through thick nylon or cotton rope.
Tie these off on a support structure or tree branch.
Use nylon or thick cotton rope to hang the bed and make sure you have enough rope at each end to thread through and back up to tie off on a tree branch or support structure.
Hang the swing bed up in your garden and place a foam, inflatable or fold-up mattress on the pallets, along with a blanket and some colourful cushions and lie back in the sun.
Article courtesy of www.home-dzine.co.za
About the Author
House for sale in Ormonde R 1 390 000
House for sale in Three Rivers R 1 300 000
House for sale in Risiville R 1 200 000
House for sale in Risiville R 1 300 000
Apartment / Flat for sale in Stellenbosch Central R 1 350 000
Townhouse for sale in Elarduspark & Ext R 990 000
House for sale in Villieria R 1 750 000
House for sale in Tileba R 1 250 000
House for sale in Pretoria North R 1 200 000
Apartment / Flat for sale in Winchester Hills R 720 000
If you are using Internet Explorer 8 or higher, please verify that your Internet Explorer compatibility view settings are not enabled.
For the best browsing experience update to the latest Version of Internet Explorer or try out Google Chrome or Mozilla Firefox.
Please contact our Customer Service Centre for further assistance. Tel. +27 (0)861 111 724